 |
loading
| Availability: | |
|---|---|
| Quantity: | |
As a premier manufacturer and supplier of advanced pneumatic solutions, we introduce the high-performance 250E oil-free air compressor pump. Engineered specifically for demanding clinical environments, this compact yet robust unit delivers exceptional airflow and pressure stability for critical applications.
Optimized for 5-liter medical oxygen concentrators
Delivers a consistent flow rate of ≥65 L/min
Engineered with a 100% oil-free mechanical architecture
Operates at an ultra-quiet 58 dB noise level
The OH250E air compressor pump head is designed for 5-liter medical oxygen concentrators, delivering 65 L/min at a rated pressure of 140 kPa to support higher airflow requirements. While maintaining a compact size, it generates powerful compression output to meet the demands of larger-capacity oxygen systems. Built with safe and reliable materials, its key components undergo strict selection and inspection to ensure dependable operation in medical environments. The overall design focuses on efficiency, durability, and compatibility with advanced oxygen generation systems.
To facilitate precise system integration and component evaluation, the detailed technical parameters of the 250E compressor pump are outlined below. These specifications represent the rigorous engineering standards applied to every unit manufactured.
Specification Category | Technical Parameter |
|---|---|
Application | 5-liter medical oxygen concentrators |
Rated Flow Rate | ≥65 L/min |
Rated Pressure | 140 kPa |
Maximum Pressure | 500 kPa |
Noise Level | 58 dB |
Lubrication Type | 100% Oil-free |
Motor Material | Pure copper motor |
Bearing Type | Permanently lubricated bearings |
Sealing Technology | High Performance piston seal |
Core Components | Self-made aluminum die-cast components |
Environmental Compliance | RoHS compliant |
Proofing Cycle | 7-15 days |
Minimum Order Requirement | Small quantities trial supported |
Warranty Period | 1-year standard warranty |
Selecting the right component partner is a strategic decision that impacts the fundamental success and longevity of your product line. We bring decades of specialized manufacturing expertise, rigorous quality control, and a deep understanding of pneumatic engineering to every single unit we produce. Our commitment is to elevate your equipment's performance through superior component integration.
Vertical Integration: By utilizing self-made aluminum die-cast components, we maintain absolute control over structural tolerances, material purity, and production timelines.
Stringent Quality Assurance: Every compressor undergoes rigorous end-of-line testing for pressure stability, acoustic performance, and electrical safety before it is cleared to leave our facility.
Global Compliance Standards: Our unwavering commitment to RoHS compliance ensures that your final assembled products will seamlessly meet the strict environmental regulations of international markets.
Engineering Partnership: We do not just supply parts; we act as an extension of your development team, providing deep technical insights to optimize your equipment's overall pneumatic performance.
Elevate your equipment's operational standards with a compressor pump that integrates cutting-edge pneumatic engineering. The 250E model is structured to provide unparalleled reliability, ensuring your end-users experience consistent, high-quality performance without the burden of frequent maintenance or unexpected downtime.
Uncompromised Air Purity: The completely oil-free architecture guarantees zero lubricant vapor transmission, which is absolutely crucial for sensitive clinical, laboratory, and food-grade applications.
Thermal Superiority: Constructed with self-made aluminum die-cast components that rapidly dissipate internal heat, maintaining optimal operating temperatures even during extended, continuous operation cycles.
Frictionless Endurance: Equipped with permanently lubricated bearings that drastically reduce mechanical wear, extending the lifecycle of the entire pumping mechanism and eliminating routine lubrication tasks.
Sealing Integrity: High-performance piston seals prevent pressure leakage, ensuring the rated 140 kPa pressure is maintained consistently without energy waste or pneumatic drop-offs.
For project engineers and product developers, aligning component capabilities with system requirements is paramount. This compressor pump delivers robust, quantifiable metrics designed to integrate flawlessly into high-demand pneumatic architectures, minimizing integration friction and accelerating your time-to-market. The precise engineering ensures that every specification translates directly into reliable field performance.
High-Volume Output: Achieves a formidable flow rate of ≥65 L/min, providing the exact volumetric capacity required to drive 5-liter oxygen generation systems efficiently.
Dynamic Pressure Range: Operates steadily at a rated pressure of 140 kPa while possessing the structural integrity to handle maximum pressure spikes up to 500 kPa safely without mechanical failure.
Compact Integration: The space-saving geometric design allows for straightforward mounting within confined equipment housings without sacrificing any compression power or thermal efficiency.
Predictable Consistency: Engineered to deliver uniform pneumatic force, eliminating flow pulsations that could disrupt sensitive downstream filtration or delicate analytical processes.
In sectors where atmospheric contamination can compromise patient safety or ruin delicate manufacturing processes, absolute gas purity is non-negotiable. This pump eliminates the need for liquid lubrication entirely, safeguarding your system's integrity from the inside out. By removing oil from the mechanical equation, we provide a cleaner, safer, and more reliable pneumatic foundation for your equipment.
Zero Hydrocarbon Emissions: The dry-running mechanism ensures that the output gas remains completely free from oil mist, particulate matter, and associated chemical odors.
Regulatory Compliance: Fully RoHS compliant, meeting stringent environmental and material safety directives required for seamless global market distribution and medical certification.
Maintenance Eradication: You completely eliminate the need for routine lubricant level checks, messy oil changes, and the costly disposal of hazardous waste materials.
Filter Preservation: The absence of aerosolized oils significantly extends the lifespan of downstream HEPA and molecular sieve filters, drastically reducing replacement costs for the end-user.
The acoustic footprint of medical and laboratory equipment directly impacts the comfort, recovery, and concentration of its users. We have meticulously engineered the acoustic and kinetic properties of this compressor to operate with whisper-quiet discretion and rock-solid stability. The result is a component that enhances the perceived premium quality of your final assembled product.
Ultra-Low Decibel Output: Operating at just 58 dB, the sound profile is comparable to a quiet conversation or background office noise, making it ideal for bedside medical devices.
Kinetic Balancing: Precision-weighted eccentric shafts and dynamically balanced rotors minimize lateral vibrations, preventing disruptive structural resonance within your equipment's chassis.
Smooth Auditory Texture: The sound emitted is a low-frequency, consistent hum, devoid of the sharp, metallic clanking that typically causes auditory fatigue over long periods.
Enhanced User Experience: By isolating vibration at the source, the operational smoothness of your device is significantly elevated, leading to higher satisfaction rates among clinical staff and patients.
The longevity of a pneumatic system is fundamentally dictated by the quality of its foundational materials. Every element of this compressor pump has been selected for its exceptional resistance to thermal stress, mechanical fatigue, and environmental degradation. We build these units to outlast standard market alternatives, protecting your brand's reputation for reliability.
Pure Copper Motor Core: Utilizes high-grade pure copper windings that offer superior electrical conductivity, reducing heat generation and preventing motor burnout under continuous heavy loads.
Die-Cast Aluminum Architecture: The self-made aluminum die-cast components provide a rigid, warp-resistant skeleton that withstands intense internal pressures while keeping the overall unit lightweight.
Advanced Piston Sealing: The high-performance piston seal is fabricated from advanced wear-resistant polymers, maintaining tight compression tolerances over thousands of hours of operation.
Lifelong Bearing Lubrication: Permanently lubricated bearings are factory-sealed against dust and debris, ensuring frictionless rotation and eliminating a common point of mechanical failure.
Long-term operational viability requires a strict adherence to energy conservation. This compressor is calibrated to maximize pneumatic output while minimizing electrical draw, directly lowering the total cost of ownership for facilities running equipment around the clock. Efficient power utilization is not just an environmental benefit; it is a core economic advantage for your clients.
Optimized Power Conversion: The electromagnetic design of the pure copper motor translates electrical input into mechanical force with minimal thermal loss, maximizing every watt consumed.
Low-Friction Mechanics: The combination of oil-free operation and high-performance seals reduces internal mechanical drag, allowing the motor to achieve target pressures with significantly less effort.
Extended Duty Cycles: Engineered for long running times, the highly efficient heat dissipation prevents thermal throttling, ensuring continuous operation without energy-wasting cool-down interruptions.
Reduced Lifecycle Costs: The powerful synergy of low power consumption and absolute zero maintenance requirements drastically cuts the financial overhead associated with running the equipment over its lifespan.
A superior product must be backed by an equally robust and responsive supply chain framework. We understand the critical nature of project timelines and risk mitigation, offering flexible procurement structures and steadfast post-delivery support to ensure your production lines never halt. Partnering with us means securing a reliable flow of essential components.
Rapid Prototyping: Benefit from an accelerated proofing cycle, with custom samples and standard units ready for dispatch within a swift 7 to 15 days to keep your R&D on schedule.
Low-Risk Procurement: We fully support small quantities for initial trial runs, allowing your engineering team to rigorously validate performance before committing to larger production volumes.
Comprehensive Protection: Every unit is backed by a solid 1-year standard warranty under normal use, safeguarding your investment against manufacturing defects and ensuring peace of mind.
Collaborative Customization: Detailed warranty terms and specific operational adaptations can be thoroughly discussed and confirmed during the project consultation and order confirmation phase.
While meticulously tailored for the stringent requirements of the medical sector, the robust and adaptable nature of this oil-free pump makes it an invaluable asset across a diverse spectrum of high-precision industries. Its reliable gas delivery system seamlessly integrates into various demanding environments, expanding the potential market reach of your equipment designs.
Medical & Healthcare: The primary driving force for 5-liter oxygen concentrators, dental delivery systems, and clinical respiratory ventilators requiring absolute air purity.
Laboratory & Analytical: Provides pure, stable air pressure for gas chromatography, mass spectrometry, and cleanroom pneumatic automation instruments.
Food Processing & Packaging: Ideal for food packaging lines, aeration processes, and sorting equipment where any risk of oil contamination is strictly prohibited by health regulations.
Aquaculture & Environmental: Delivers continuous, high-volume oxygenation for commercial fish farming and effectively drives ozone generators for advanced water purification systems.
Industrial Automation: Powers delicate pneumatic actuators, robotic sorting arms, and all sophisticated equipment that outputs gases and requires a clean, reliable pneumatic source.
To assist your engineering and procurement teams in their comprehensive evaluation process, we have compiled detailed responses to the most critical technical and operational inquiries regarding our high-performance oil-free compressor pump.
Q: How does the pure copper motor impact the thermal management of the compressor during continuous operation?
A: The pure copper motor significantly enhances electrical conductivity and reduces resistance compared to standard aluminum windings. This high efficiency minimizes the internal generation of heat, allowing the compressor to maintain a stable, safe operating temperature even during extended, continuous duty cycles.
Q: What specific mechanisms ensure the pump achieves its 58 dB low-noise rating?
A: The impressive 58 dB acoustic profile is achieved through a combination of precision-balanced eccentric shafts, vibration-dampening mounting points, and the extremely tight machining tolerances of our self-made aluminum die-cast components, which collectively eliminate structural resonance and mechanical rattling.
Q: Can this compressor safely handle pressure spikes above its rated 140 kPa?
A: Yes. While the pump is optimized for a continuous rated pressure of 140 kPa to ensure maximum longevity and efficiency, the robust structural design and high-performance piston seals allow it to safely withstand maximum pressure loads of up to 500 kPa without catastrophic failure or seal blowout.
Q: What is the procedure and timeline for acquiring a sample for our internal testing?
A: We highly encourage physical validation of our components. Once your specific technical requirements are confirmed, our agile production team can complete the proofing process and have a sample ready for dispatch within approximately 7 to 15 days. We fully support small quantity trials to facilitate your rigorous R&D process.
Q: How does the 'permanently lubricated bearing' design affect the long-term maintenance schedule?
A: By utilizing premium bearings that are factory-sealed with advanced synthetic lubricants, the need for routine greasing or oiling is entirely eliminated. This closed design prevents environmental dust ingress and ensures frictionless operation for the entire lifespan of the pump, resulting in a true zero-maintenance lubrication system.
content is empty!
